Hook; Mustad 2487-2457 16-20
Thread; Olive Danville 6-0
Tail; Partridge
Body; Olive Turkey or Goose Biot (notch facing back)
Wingcase; Dun CDC tied loop style
Thorax;BWO superfine dubbing

Notch facing back gives smooth body!
————–forward gives segrated body
Dab some head cement on body for indurance

Hook # 12
Body : swiss straw, ostrich herl, mono
Eyes : 50lb mono

Too
Lenghthy
to
write
Here

Underbody: craft foam
Body: Furry foam coloured with markers
Wings: varnished swiss straw
Legs: Folded and varnished thread

N/A

Hook : #10 4x
Thread mono
Body . 2mm foam ,clear Swiss straw, epoxy
Legs : Japanese nymph legs

Tie on as usual
Start foam near hook point and work forward to eye leaving a piece extended for the head. Continue adding foam and segmenting with thread until you have a segmented on top fo hook. tie in three sets of legs just below and behind the head . next build your body underneath the hook passing a piece between the legs and tying it in just before the head.Work your thread to the end of the fly near the barb and tie in the Swiss straw . work your way back to the head winding the thread then straw. cut legs and bend them to shape tie off and cover fly with epoxy.

HOOK: SIZE 10
THREAD: WHITE 6/0
WEIGTH: LEAD WIRE .15
EYES: A COUPLE OF CHAIN BALLS
LEGS: TIPS OF WHITE HEN HACKLE
ANTENNAE: TIPS OF WHITE HEN HACKLE
BODY: SCUD BACK 1/8″ CLEAR
UNDERBODY: SYNTETIC WHITE DUBBING

1.PLACE A HOOK SIZE 10 ON VISE
2.PUT A COUPLE OF BALLS CHAIN, LET IT A 3 MM BEFORE EYE HOOK
3.PLACE LEAD WIRE JUST 5 TURNS
4. CUT 5 MM SCUD BACK AND SHAPE THE TAIL, SECURE ON THE GAP
5.PLACE A TRIP OF SCUD BACK AND SECURE ON THE GAP (FINAL OF SHANK)
6.MADE A DUBBING LOOP AND COVER OF GAP TO CHAIN EYES
7.PUT A FEATHER OF HACKLE ON THE LEAD WIRE AND WRAP AROUND
8.MAKE THE BODY SEGMENTS WITH SCUD BACK, BE CAREFULLY DON´T COVER THE HACKLE
9.PULL A COUPLE OF HACKLE TIPS TO MAKE THE ANTENNAE
10.COVER THE EYES WITH THE SCUD BACK
11.FINAL NUDE, AND READY

hook :size 6
thread 8/0
craft foam
craft wire
swiss straw
fury foam JNL

Tie on to hook then tie in 2 pieces of craft foam at the bend of the hook one on top one on bottom to form the abdomen next behind the craft foam tie in 2 pieces of furry foam, pull forward and tie down . make three pairs of leg out of material of your choice and tie on top of hook.next make 2 wings and puncture the fury foam to tie in position. fold furry foam forward ,tie off and color

na
ya da yada
yada yada
yadayada

na

Foam, brush bristles, mono, peacock fibers, false fingernails, edding pens, varnish, daves flexi cement, porcupine quills

N/A

craft wire
craft foam
medium chenile
8/0 black thread
epoxy
paint markers

Twist 5 strands of craft wire and wrap to the hook to form the tail. do the same for the arms and legs.cover with foam for ththick areas and chenile for the thin areas. form head out a single block of foam and tie in place. coat with epoxy and paint

Microfibets, deer hair, thread, lamanating sheets, monofilament, V-rib

N/A